Remember, everyone starts as a beginner at painting. Just because you have never painted a house doesn’t mean you shouldn’t give it a try. The money you save by painting your own house in North East is money you can put into other home improvements. It can also be a fun thing for the whole family to do.
Choose the project closest to yours. Get started and you will soon know what color you want to paint your house and you’ll have a vision of what it is going to look like when you’re finished.
Here are some of the basics. Of course the first thing you need to do is wash down the walls of your house. A pressure washer can be rented at almost any rental yard in North East and is the best way to do that. Now go around with a scraper and remove all loose paint and chipped areas. You don’t have to scrape the entire wall, but any areas where the surface is not flat can cause you problems as you paint your house.
Next, figure out your square footage so you can determine the amount of paint you will need to buy. Buy your paint in 5-gallon pails, rather than gallons to save more money.
Talk to the helper at your local paint store and tell him about your project. They can help you decide on how many brushes and rollers and other items you will need. You can buy natural or synthetic bristles for oil based paints, but only use synthetic bristles with latex paint. The same rule applies to rollers. Good rollers can run you around $7, but buy high-quality paintbrushes. A good brush for cutting in around edges will run you about $30.
Make sure you purchased some painter’s tape. It’s blue tape that comes in different widths and is easy to remove without messing up your paint job. That brings us to preparation. Tape off all areas you don’t wish to get this color of paint on. If there are large areas to cover, make sure you pick up some rolls of plastic. You can tape the edges of the plastic down over whatever you need to cover.
Don’t paint out of the paint cans. First reason is that leaving the paint can open will dry out the paint and make it difficult to apply. Another reason is that your brush or roller picks up dirt and foreign objects, which will end up in your paint and may even change the color as you go along.
Do all of your cutting or trimming in before you paint the walls. Use a 4″ brush and with a smooth stroke guide it around the edges where you taped off. Make sure you have plenty of paint on your brush. The biggest mistake people make is trying to stretch the paint too far. Keep drips cleaned up as you go with a small rag. Remember you will be rolling up to the edge of your cut, so don’t worry about that, just make sure you cover the edges well.
Start on the edges of your walls and work your way toward the middle. Most people don’t do this and problems can result. If you start and new can of paint in the middle of the wall and there is any difference in the color at all, it will show up there more than it would on the edges. So with each new can of paint you open, start at the edges first.
Dip your roller in water (for Latex) or solvent (for oil-based paint), before you start. Whether you use a pan or a 5-gallon bucket with a screen, make sure you roll it out a little to make sure it isn’t dripping. You don’t need to go all the way from the top to the bottom as you paint. Do what you can reach.
Apply the paint in a Y or an N pattern, then apply paint in columns up and down smoothing out all the edges or ridges as you go. Again don’t try to stretch the paint out, make sure you have enough paint on your roller to give it a good coat. If you are applying more than one coat, make sure the first coat is completely dry before applying a new coat of paint.
Corners are a difficult part to learn to paint. If you aren’t careful, this is where you will see paint drips later. Get as close to corners as you can, but don’t scrape the roller against the corner. That will cause drips. If you are unsure, have a paintbrush handy to smooth out drips. That is also a good idea overall. Keep a paintbrush ready for taking care of any drips or ridges you leave behind. Doing this as you go is much easier than trying to fix it after it’s dry or partially dry.
Using tray liners for your paint trays will save you a lot of time at cleanup. Soak your brushes when done for awhile and they will also be easier to clean. For water based paint, soak in water and for oil based paint soak them in solvent.
I hope some of these tips have been helpful to you. Have confidence that you can do this job yourself. You will appreciate and enjoy it much more knowing that you or you and your family completed the job rather than hiring someone else to do it.
We should always learn from mistakes, ether by our own, or the misfortunes of others. These ten questions will limit the chance of ever repeating the same mistake twice. Decorating a home is an enjoyable experience its a time for change, and the opportunity to create new family memories.
Home Painting Tips
There are a few ways to get the walls and ceilings of your choosing. You can opt to choose solid plaster versus the traditional plasterboard
- Less common.
- Considered higher end.
- Stronger finish.
- More labour and cost.
- Solid plaster often provides a superior sound barrier and is harder and stronger than Gyprock.
Solid plaster is best installed and applied by a professional plasterer. Unless you know a lot about plastering you should not attempt to render your walls with solid plaster. It provides a great look and feel to any room in your house as well. The majorities of home owners prefer plasterboard for its ease of installation and cost effectiveness. It is really your decision on which type of material you want to use in your home.
- More common.
- Faster to install, less labour intensive, less expensive.
- Plasterboard can be applied to metal and timber framing or to masonry.
- Can be cut to size, is easy to install and requires less talent.
Australian and New Zealand Standard requires a minimum level of straightness of the substrate for the application of plasterboard. In all substrates, dimensional accuracy is the key to success. Valleys or hollows may generally be easy to hide, but high points are very difficult to conceal.
Plasterboard will not straighten walls or ceilings. No amount of joint compound can make a poorly framed job acceptable
How else is plaster used?
Now that you have learned a bit more about how plaster is installed, its benefits and the different types, you may wonder how else plaster is used besides the traditional methods of putting it on the wall. Many ceilings are created with the board as well. For example many decorative ceilings like a decorative rose ceiling require the installation and usage of plasterboard, which is used more often that solid plaster because it is an ideal product for construction to be sustainable. It is a light weight material that is easy to transport and cheaper to purchase. It is also made of 100% recyclable material. Plasterboard is usually the number one choice of many home owners when they are considering redecorating their homes.
If you are thinking about taking on a new home remodel project you may want to dive into which type of plaster you will use in your home. With the two different types you can see just how each has its own benefits and uses. With plasterboard being easy to install and light weight it is usually the number one preferred choice of people all around.
The best way to figure out which type of plaster is best for you either plasterboard, or solid plaster is to make a list of all the pros and cons. If your cons outweigh the pros then you know which decision to make. It is important to figure out which types are more beneficial to your needs.