Remember, everyone starts as a beginner at painting. Just because you have never painted a house doesn’t mean you shouldn’t give it a try. The money you save by painting your own house in North East is money you can put into other home improvements. It can also be a fun thing for the whole family to do.
Choose the project closest to yours. Get started and you will soon know what color you want to paint your house and you’ll have a vision of what it is going to look like when you’re finished.
Here are some of the basics. Of course the first thing you need to do is wash down the walls of your house. A pressure washer can be rented at almost any rental yard in North East and is the best way to do that. Now go around with a scraper and remove all loose paint and chipped areas. You don’t have to scrape the entire wall, but any areas where the surface is not flat can cause you problems as you paint your house.
Next, figure out your square footage so you can determine the amount of paint you will need to buy. Buy your paint in 5-gallon pails, rather than gallons to save more money.
Talk to the helper at your local paint store and tell him about your project. They can help you decide on how many brushes and rollers and other items you will need. You can buy natural or synthetic bristles for oil based paints, but only use synthetic bristles with latex paint. The same rule applies to rollers. Good rollers can run you around $7, but buy high-quality paintbrushes. A good brush for cutting in around edges will run you about $30.
Make sure you purchased some painter’s tape. It’s blue tape that comes in different widths and is easy to remove without messing up your paint job. That brings us to preparation. Tape off all areas you don’t wish to get this color of paint on. If there are large areas to cover, make sure you pick up some rolls of plastic. You can tape the edges of the plastic down over whatever you need to cover.
Don’t paint out of the paint cans. First reason is that leaving the paint can open will dry out the paint and make it difficult to apply. Another reason is that your brush or roller picks up dirt and foreign objects, which will end up in your paint and may even change the color as you go along.
Do all of your cutting or trimming in before you paint the walls. Use a 4″ brush and with a smooth stroke guide it around the edges where you taped off. Make sure you have plenty of paint on your brush. The biggest mistake people make is trying to stretch the paint too far. Keep drips cleaned up as you go with a small rag. Remember you will be rolling up to the edge of your cut, so don’t worry about that, just make sure you cover the edges well.
Start on the edges of your walls and work your way toward the middle. Most people don’t do this and problems can result. If you start and new can of paint in the middle of the wall and there is any difference in the color at all, it will show up there more than it would on the edges. So with each new can of paint you open, start at the edges first.
Dip your roller in water (for Latex) or solvent (for oil-based paint), before you start. Whether you use a pan or a 5-gallon bucket with a screen, make sure you roll it out a little to make sure it isn’t dripping. You don’t need to go all the way from the top to the bottom as you paint. Do what you can reach.
Apply the paint in a Y or an N pattern, then apply paint in columns up and down smoothing out all the edges or ridges as you go. Again don’t try to stretch the paint out, make sure you have enough paint on your roller to give it a good coat. If you are applying more than one coat, make sure the first coat is completely dry before applying a new coat of paint.
Corners are a difficult part to learn to paint. If you aren’t careful, this is where you will see paint drips later. Get as close to corners as you can, but don’t scrape the roller against the corner. That will cause drips. If you are unsure, have a paintbrush handy to smooth out drips. That is also a good idea overall. Keep a paintbrush ready for taking care of any drips or ridges you leave behind. Doing this as you go is much easier than trying to fix it after it’s dry or partially dry.
Using tray liners for your paint trays will save you a lot of time at cleanup. Soak your brushes when done for awhile and they will also be easier to clean. For water based paint, soak in water and for oil based paint soak them in solvent.
I hope some of these tips have been helpful to you. Have confidence that you can do this job yourself. You will appreciate and enjoy it much more knowing that you or you and your family completed the job rather than hiring someone else to do it.
We should always learn from mistakes, ether by our own, or the misfortunes of others. These ten questions will limit the chance of ever repeating the same mistake twice. Decorating a home is an enjoyable experience its a time for change, and the opportunity to create new family memories.
Solid Plastering - How to Render a Brick Wall
Online when you click on the word plastering on the search engine, you will be flooded with millions of results. Endless tips on plastering, how to plaster and so on will bombard you and probably even give you information overload. Indeed, there are so many resources to use concerning plastering. But what do you do if the repair job you did is the one that now needs repairing? What are the tips on how to repair the plastering that you did? This article will answer those questions.
Many homes have been plastered in one point of their existence. Plaster, which is a durable and good-looking material, is a very practical step towards home improvement and beautification. Where there are holes or marks on your wall, there is nothing a good amount of plaster can fix. However, there is just one downside to this: plaster can develop cracks in time.
There are those who use latex paint to conceal little plaster cracks, which is fine. But this is only a temporary solution, as it will only last a few weeks or months before the cracks annoyingly start showing up again. And when they do, you would probably want to scratch your head in dismay. The trick here is actually to enlarge the crack and fix it properly all together. It may seem like a strange idea to worsen the damage but the truth is fixing a larger crack is easier than fixing many small ones.
Here are some useful steps on how to repair major cracks in plaster:
Step 1: First, you have to gather the things you will need. Just like with any procedure, it is important to have a complete set of equipment to do the job efficiently. Some of the things you will need to repair a cracked plaster includes utility knife, vacuum cleaner, plaster of paris or premixed plaster repair compound, paintbrushes, scraper or trowel, wood block, medium- or fine-grade sandpaper, primer and paint.
Step 2: Remove loose plaster using the utility knife. Turn the knife to make the gap larger and cleaner. Get rid of any debris but make sure you maintain the structure of the surface around it. Use a vacuum cleaner to clean loose plaster.
Step 3: Combine a thick amount of plaster with water. Use a paintbrush dipped in water to wet the crack thoroughly. Apply plaster of paris or other repair compound of your choice into the wet crack, filling it completely. Smooth the surface with a trowel. Allow it to dry for a least one whole day.
Step 4: Once completely dried, gently sand patch using medium-or fine-grade sandpaper. To make this easier, wrap the sandpaper around the wood block. For very wide cracks, repeat the process to make the surface smoother. Wait for the area to dry for a whole day.
Step 5: Rub with sandpaper again and then apply a thin coat of paint or primer on the area. After it has dried, you can begin painting the entire wall. To recap, get rid of loose plaster, wet the crack, pack it with plaster of paris, smooth the surface and then let it dry before rubbing with sandpaper. Repairing cracks in plaster is not that hard. With the right skills and a good amount of patience, you can restore your wall's beauty and splendour.